Havok
Expert Freestyler
Posts: 156
|
Post by Havok on Dec 28, 2009 10:58:40 GMT -5
does anyone know how to remove the drive side bearing in the hub of my fed/khe freecoaster? i've watched all the tutorials i could find without any luck.
|
|
|
Post by jim on Dec 28, 2009 15:16:10 GMT -5
I'll subscribe to this. My drive side bearing is cashed. It's kind of hard to get at.
|
|
Havok
Expert Freestyler
Posts: 156
|
Post by Havok on Dec 28, 2009 20:10:18 GMT -5
ok i just got an email from Pat. "Remove everything from the opposite side. Then find something that you can insert into the hub that will contact the back side of the bearing and that you can use to hammer it out. I have found that finding a socket that is the correct diameter so it only contacts the metal surface of the bearing works best."
i'm trying this now, i'll get back here as soon as i test it.
|
|
Havok
Expert Freestyler
Posts: 156
|
Post by Havok on Dec 28, 2009 20:47:02 GMT -5
it worked!!!!! a 3/4" socket, looks like a regular thick walled one. two taps and she fell out.
Pat is the sh!t.
|
|
Havok
Expert Freestyler
Posts: 156
|
Post by Havok on Jan 12, 2010 13:07:51 GMT -5
I'll subscribe to this. My drive side bearing is cashed. It's kind of hard to get at. Pat has those driver side bearings for around 5$ i replaced mine last week.
|
|